D&H PD05A - System Formats and Configuration; SelecTRIX 1 (SX1) System Format; DCC System Format

35
Fahrzeug-/Funktionsdecoder ab Firmware-Version 1.11
35
Locomotive/Locomotive function decoder from firmware version 3.12
Notice:
In case of an incorrect wiring of the light or track wire, there is no need to solder off the wires, as the assignement can
be interchanged electronically by programming (see setting options of the respective system format: CV51 or. par031,
par033).
6.4 Check after installation
See notice in point 5.4.
7 System format SelecTRIX 1 (SX1)
You can find the detailed version at www.doehler-haass.de → DOWNLOADS → Fahrzeugdecoder → Fahrzeugdecoder
8 System format DCC
8.1 Functions
Short address ................................................... 1-27
Long address .......................................... 0001-9999
Speed steps ............................................ 14, 28,126
Speed steps (internal) ........................................ 127
Front light/rear light (dimmable) ..........................yes
Additional functions (dimmable) ............................ 2
Functions total ..................................................... 28
Operation with brake diodes ..............................yes
Operation with brake generators ........................yes
Consist mode .....................................................yes
Programming On The Main ................................yes
Locomotive number output ................................yes
BA DH engl FW3_12 Druck.indd 35BA DH engl FW3_12 Druck.indd 35 10.05.21 14:2710.05.21 14:27