EasyManua.ls Logo

D&R Lyra - 15 Specifications; General System Parameters; A;Dand D;A Converters; Microphone Inputs

Default Icon
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Lyra Digital Mixer from D&R Phone +31 294 418014, email: info@d-r.nl Page 57
15 Specifications
15.1 General system parameters
Level specs in dB Full Scale for digital and dBu for analog data.
0dBu=0.775Vrms
Sampling rate: 32kHz, 44.1kHz, 48kHz, 50ppm (when internally synchronized).
Headroom: 20 dB
15.2 A/D and D/A Converters
A/D Burr Brown/Texas Instruments 24 bit Delta Sigma
Dynamic range: typically 112 dB
THD+Noise: <-102 dB
D/A Burr Brown/Texas Instruments 24 bit Advanced Segment
Dynamic range: typically 113 dB
THD+Noise: <-100 dB (0.001%)
15.3 Microphone Inputs
Mic INP. Bal. 2kOhm
Signal to noise: - 128dBr (60dB gain)
CMRR: Mic input max. Gain: 50Hz 75dB
Phantom is switchable +48volt
15.4 Line Inputs
Input sensitivity: -20dB to.+20dB
Line inp. bal 10kOhm
Signal to noise: -100dBr (20 dB gain)
CMRR: Line input max.. gain: 50Hz 50dB
LINE OUTPUTS
+4dBu / -10dBV electronically balanced or optional transformers.
15.5 Equalizer
LF: +/- 18 dB @ 120Hz Peaking
MF: +/- 18 dB @ 1200Hz Peaking
HF: +/- 18 dB @12000Hz Peaking
15.6 Digital Inputs
AES/EBU (AES3), S/P-DIF, Optical (Toslink)
16/20/24 bit 32kHz to 96kHz (built in sample rate converter).
THD+N: -105dBfs @1kHz, 0dBfs
Frequency response: 20-20kHz, 0.1 dB
Input impedance: 110 Ohm (XLR) 75Ohm (cinch)

Table of Contents

Related product manuals