EasyManua.ls Logo

D&R Lyra - Page 66

Default Icon
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Lyra Digital Mixer from D&R Phone +31 294 418014, email: info@d-r.nl Page 66
//1 = Unknown user
//2 = Operator 1
//3 = Operator 2
//4 = Supervisor
//5 = System Administrator
OnRemoteBuss1(long State)
//If the Remote Buss 1 changes, its gives the new state with this event
OnRemoteBuss2(long State)
//If the Remote Buss 2 changes, its gives the new state with this event
OnRemoteBuss3(long State)
//If the Remote Buss 3 changes, its gives the new state with this event
OnRemoteBuss4(long State)
//If the Remote Buss 4 changes, its gives the new state with this event
OnRedlight1(long State)
//If the Redlight 1 changes, its gives the new state with this event
OnRedlight2(long State)
//If the Redlight 2 changes, its gives the new state with this event
Methods:
Void ConnectToIP()
//Connects to IP
Void Disconnect()
//Disconnect from IP
Void Logon(unsigned char *Username, unsigned char *Password)
//Log on if a user and password
Void SetSource(long ModuleNr, long Source)
//Set ModuleNr Source, Source may be 0 till 34
//0 = N.C.
//1-4 = MIC1-MIC4
//5-11 = Analog1-Analog7
//12-18 = Digital1-Digital7
//19-34 = Cobra1/2 – Cobra31/32
Void SetOn(long ModuleNr, long State)
//Set ON switch at ModuleNr, 1=Switch Down/0=Switch Up
Void SetCUE(long ModuleNr, long State)
//Set CUE switch at ModuleNr, , 1=Switch Down/0=Switch Up
Void SetSub(long ModuleNr, long State)
//Set SUB Routing at ModuleNr, 1=Switch Down/0=Switch Up
Void SetProg(long ModuleNr, long State)
//Set PROG Routing at ModuleNr, 1=Switch Down/0=Switch Up
Void SetEQOn(long ModuleNr, long State)
//Set EQ On at ModuleNr, 1=Switch Down/0=Switch Up
Void SetMono(long ModuleNr, long State)
//Set Mono at ModuleNr, 1=Switch Down/0=Switch Up

Table of Contents

Related product manuals