Danfoss ADAP-KOOL Drive User Manual

18-35 Analog Out X42/11 [V]
Range: Function:
0.000 N/A* [0.000 - 30.000 N/A] Read out of the value of the signal applied to terminal X42/11 on the Analog I/O Card.
The value shown reflects the selection in par.26-60
Terminal X42/11 Output .
3 Parameter Description ADAP-KOOL
®
Drive Programming Guide
144 MG.11.N1.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss ADAP-KOOL Drive Specifications

General

Brand	Danfoss
Model	ADAP-KOOL Drive
Category	DC Drives
Language	English