Danfoss ADAP-KOOL Drive

1Introduction
1.1.1
Software Version and Approvals: ADAP-KOOL
®
Drive
ADAP-KOOL
®
Drive
Operating Instructions
Software version: 2.xx
This Operating Instructions can be used for all ADAP-KOOL
®
Drive frequency converters with software version 2.xx.
The software version number can be seen from parameter 15-43.
1.1.2 Symbols
Symbols used in this guide.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
* Indicates default setting
ADAP-KOOL
®
Drive Programming Guide 1 Introduction
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark 3
1