Danfoss ADAP-KOOL Drive - Page 147

20-03 Feedback 2 Source
Option: Function:
See par.20-00 Feedback 1 Source for details.
[0] * No function
[1] Analog input 53
[2] Analog input 54
[3] Pulse input 29
[4] Pulse input 33
[7] Analog input X30/11
[8] Analog input X30/12
[9] Analog Input X42/1
[10] Analog Input X42/3
[11] Analog Input X42/5
[100] Bus feedback 1
[101] Bus feedback 2
[102] Bus feedback 3
20-04 Feedback 2 Conversion
Option: Function:
See par. 20-01 Feedback 1 Conversion for details.
[0] * Linear
[1] Square root
[2] Pressure to temperature
20-05 Feedback 2 Source Unit
Option: Function:
See par. 20-02 Feedback 1 Source Unit for details.
[0] *
[1] %
[5] PPM
[10] 1/min
[11] RPM
[12] Pulse/s
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[170] psi
[171] lb/in²
[172] in WG
[173] ft WG
ADAP-KOOL
®
Drive Programming Guide 3 Parameter Description
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark 147
3