23-83 Energy Savings
Range: Function:
0 kWh* [0 - 0 kWh] This parameter allows a readout of the accumulated difference between the reference power and
the actual output power.
If motor size set in Hp (par.1-21
Motor Power [HP]
), the equivalent kW value will be used for the
Energy Savings.
23-84 Cost Savings
Range: Function:
0 N/A* [0 - 2147483647 N/A] This parameter allows a readout of the calculation based on the above equation (in local currency).
ADAP-KOOL
®
Drive Programming Guide 3 Parameter Description
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark
199
3
To Next Page
Loading...
