Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
18-0* Maintenance Log
18-00 Maintenance Log: Item 0 N/A All set-ups FALSE 0 Uint8
18-01 Maintenance Log: Action 0 N/A All set-ups FALSE 0 Uint8
18-02 Maintenance Log: Time 0 s All set-ups FALSE 0 Uint32
18-03 Maintenance Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay
18-1* Fire Mode Log
18-10 Fire Mode Log: Event 0 N/A All set-ups FALSE 0 Uint8
18-11 Fire Mode Log: Time 0 s All set-ups FALSE 0 Uint32
18-12 Fire Mode Log: Date and Time ExpressionLimit All set-ups FALSE 0 TimeOfDay
18-3* Inputs & Outputs
18-30 Analog Input X42/1 0.000 N/A All set-ups FALSE -3 Int32
18-31 Analog Input X42/3 0.000 N/A All set-ups FALSE -3 Int32
18-32 Analog Input X42/5 0.000 N/A All set-ups FALSE -3 Int32
18-33 Analog Out X42/7 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-34 Analog Out X42/9 [V] 0.000 N/A All set-ups FALSE -3 Int16
18-35 Analog Out X42/11 [V] 0.000 N/A All set-ups FALSE -3 Int16
4.1.15 18-** Info & Readouts
4 Parameter Lists ADAP-KOOL
®
Drive Programming Guide
242
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark
4
To Next Page
Loading...
