EasyManua.ls Logo

Danfoss AK-PC 551 - Safety functions; Sensor failure; Min.;max. suction pressure Po; Max. condensing pressure Pc

Danfoss AK-PC 551
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AK-PC 551 Technical brochure RC8CF102 © Danfoss 08-2014 5
Introduction
Compressor combinations
The compressor capacity can be controlled according to the
suction pressure Po or a media temperature sensor S4�
AK-PC 551 covers a variety of compressor combinations�
Inputs and outputs
All in- and outputs of an AK-PC 551 controller can be congured
for various functions and signal types:
8 analogue inputs for pressure transmitters and temperature
sensors�
6 digital relay outputs for compressors, fans, alarm�
2 digital solid state outputs for PWM control of Digital scroll
or Stream compressor� If not used for this purpose they can
be used as normal relay outputs�
2 analogue outputs for speed control of compressors and
condenser fans�
Speed control of all fans Step control of all fans
Condenser combinations
The condenser capacity can be controlled according to the
condensing pressure Pc or a media temperature sensor S7
The condenser can be controlled in two ways:
Speed control of all fans
Step control of single fans

Other manuals for Danfoss AK-PC 551

Related product manuals