Danfoss AKD 2800 User Manual

AKD 2800
All about AKD
2800
■ Factory Settings
PNU
#
Parameter
description
Factory setting 4-setup Conv.
index
Data
type
001 Language English No 0 5
002 Local/remote operation Remote-controlled Yes 0 5
003 Local reference 000,000.000 Yes -3 4
004 Active Setup Setup 1 No 0 5
005 Programming Setup Active Setup No 0 5
006 Setup copying No copying No 0 5
007 LCP copy No copying No 0 5
008 Display scaling 1.00 Yes -2 6
009 Large display readout Frequency [Hz] Yes 0 5
010 Small display line 1.1 Reference [%] Yes 0 5
011 Small display line 1.2 Motor current [A] Yes 0 5
012 Small display line 1.3 Power [kW] Yes 0 5
013 Local control Remote control
as par. 100
Yes 0 5
014 Local stop/reset Active Yes 0 5
017 Local reset of trip Active Yes 0 5
018 Data change lock Not locked Yes 0 5
024 User-defined Quick Menu Not active No 0 5
025 Quick Menu Setup 000 No 0 6
4-Setup:
’Yes’ means that the parameter can be programmed
individual
ly in each of the four Setups, i.e. one single
parameter can have four different data values. ’No’
meansthatthedatavaluewillbethesameinallSetups.
C
onversion index:
Thisnumberreferstoaconversionfiguretobeused
when writing or reading via serial communication
with a frequency converter.
See Data character in Serial communication.
D
ata type:
Data type shows the type and length of the telegram.
Data type Description
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9Textstring
MG.28.H2.02 -
71

Danfoss AKD 2800 Specifications

General

Brand	Danfoss
Model	AKD 2800
Category	DC Drives
Language	English