The temperature display can be calibrated (offset) so the •
thermostat shows the same temperature as another ther-
mometer in the room.
(This does not apply if the thermostat is configured to use a •
floor sensor only.)
Select the desired offset value.
Press to confirm.
Setting the offset value only recalibrates the thermostat’s •
temperature reference point and does not adjust heating
element power.
If a thermometer and the thermostat display very differ-•
ent temperature readings, one of the units is probably
faulty and should be repaired or replaced.
The economy set-back level governs how much the tem-•
perature is lowered during economy periods.
Select the desired set-back level.•
(Choose -5 °C if the temperature is to be lowered by 5 degrees).•
Installation manual
To Next Page
Loading...
Need help?
General
