Danfoss FC 300 Series User Manual

15-53 Power Card Serial Number
Range: Function:
0 N/A * [0 - 0 N/A] View the power card serial number.
15-59 CSIV Filename
Range: Function:
Application
dependent
*
[0 - 0 ] Shows the currently used CSIV
(Costumer Specific Initial Values)
filename.
3.16.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0 and C1.
15-60 Option Mounted
Range: Function:
0 N/A * [0 - 0 N/A] View the installed option type.
15-61 Option SW Version
Range: Function:
0 N/A * [0 - 0 N/A] View the installed option software version.
15-62 Option Ordering No
Range: Function:
0 N/A * [0 - 0 N/A] Shows the ordering number for the installed
options.
15-63 Option Serial No
Range: Function:
0 N/A * [0 - 0 N/A] View the installed option serial number.
3.16.7 15-9* Parameter Info
15-92 Defined Parameters
Array [1000]
Range: Function:
0 N/A * [0 - 9999 N/A] View a list of all defined parameters in
the adjustable frequency drive. The list
ends with 0.
15-93 Modified Parameters
Array [1000]
Range: Function:
0 N/A * [0 - 9999 N/
A]
View a list of the parameters that have been
changed from their default setting. The list
ends with 0. Changes may not be visible
until up to 30 seconds after implemen-
tation.
15-99 Parameter Metadata
Array [30]
Range: Function:
0 * [0 - 9999 ] This parameter contains data used by the MCT10
software tool.
Parameter Descriptions FC 300 Programming Guide
MG.33.MA.22 - VLT
®
is a registered Danfoss trademark 3-131
3
3

Danfoss FC 300 Series Specifications

General

Brand	Danfoss
Model	FC 300 Series
Category	DC Drives
Language	English