Danfoss Heating
11
GB
If the same programme is required
press the COPY button and the
previous days programme will be
entered.
If a diff erent programme is
required repeat steps 2-4.
5. Press the PROG button once to
enter hot water programming or
twice to return to run mode.
6. Proceed to page 14.
Please Note
If this setting is made on a weekend day SASU will show in
place of MOTUWETHFR.
DAY/HOL
DAY/HOL
1. Press PROG once until SET CH
ON TIME appears at the top of
the display. Note the current day
is displayed. Press the DAY/HOL
button until the required day is
displayed.
2. Use the + or - buttons to set the
time you want your heating to fi rst
come on in the morning (Event 1).
3. Press NEXT ON/OFF to move to
Event 2.
DAY/HOL
DAY/HOL
1.7.2 Programming the heating in 7 day mode
To Next Page
Loading...
