FP715SI
12
GB
DAY/HOL
DAY/HOL
4. Continue programming the
central heating ON and OFF
times in this way by using the +
or - buttons to set the time you
want and pressing the NEXT ON/
OFF button to move to the next
setting.
5. Press DAY/HOL button once only.
The next day will appear at the
bottom of the display. Repeat
steps 2-5.
6. Press the PROG button twice
to return the unit to RUN mode
(time appears and the colon in the
display begins to fl ash).
7. Proceed to page 14.
DAY/HOL
1. Press PROG once until SET CH ON
TIME appears at the top of the
display.
Use the + or - buttons to set the
time you want your heating to fi rst
come on in the morning (Event 1).
2. Press NEXT ON/OFF to move to
Event 2.
Continue programming the
central heating ON and OFF times
by pressing:
DAY/HOL
DAY/HOL
1.7.3 Programming the heating in 24 hour mode
To Next Page
Loading...
