Danfoss H1 Basic Information

Overview of H1 pumps technical specifications
The table below shows the available range of H1 pumps as of this printing, with their respective speed,
pressure, weight and mounting flange:
Feature 045 053 060 068 069 078 089 100 115 130 147 165 210 250
Displacement
cm³ [in³]
45.0
[2.75]
53.8
[3.28]
60.4
[3.69]
68.0
[4.15]
69.2
[4.22]
78.1
[4.77]
89.2
[5.44]
101.7
[6.21]
115.2
[7.03]
130.0
[7.93]
147.2
[8.98]
165.1
[10.08]
211.5
[12.91]
251.7
[15.36]
Rated speed
min
-1
(rpm)
3400 3400 3500 3500 3500 3500 3300 3300 3200 3200 3000 3000 2600 2600
Max speed
min
-1
(rpm)
3500 3500 4000 4000 4000 4000 3800 3800 3400 3400 3100 3100 2800 2800
Max working
pressure
1)
bar [psi]
420
[6090]
380
[5510]
420
[6090]
380
[5510]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
450
[6525]
Max pressure
bar [psi]
450
[6525]
400
[5800]
450
[6525]
400
[5800]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
Weight dry
(W/O PTO,
filter); kg [lb]
single: 41 [90]
tandem: 65 [143]
50
[110]
50
[110]
56
[123]
56
[123]
62
[137]
62
[137]
83
[187]
83
[187]
96
[211]
96
[211]
163
[360]
163
[360]
Mounting
flange
SAE B
2-bolt
SAE B
2-bolt
SAE C
4-bolt
SAE C
4-bolt
SAE C
4-bolt
SAE C
4-bolt
SAE C
4-bolt
SAE C
4-bolt
SAE D
4-bolt
SAE D
4-bolt
SAE D
4-bolt
SAE D
4-bolt
SAE E
4-bolt
SAE E
4-bolt
1)
Applied pressures above maximum working pressure requires Danfoss application approval.
Control options
Size 045/053
Tandem
045/053
Single
060/068 069/078 089/100 115/130 147/165 210/250
EDC
MDC
FNR
– –
NFPE
FDC
–
AC
–
For more details go to the website http://www.powersolutions.danfoss.com/literature/ or see H1 pumps
literature reference on page 6.
Basic Information
H1 Axial Piston Pumps, Single and Tandem
Danfoss hydrostatic product family
©
Danfoss | April 2017 11062168 | BC00000057en-US0602 | 5

Danfoss H1 Specifications

General

Brand	Danfoss
Model	H1
Category	Water Pump
Language	English