Danfoss KPP Pulse Pickup - Dimensions

Technical Information KPP PPU
11029257 • Rev BB • July 2013 7
Dimensions
Common Lead Wire Conguration (at end)
Non-adjustable Wire Conguration (conical end)
Conguration Used Only for Series 51 and 51-1 Cartridge Motors (conical end)
Dimensions in mm [inches].
Speed ring
9/16-18 UNF-2A THD (all models)
O-ring
P/N 9004201-3700
Locking nut
P/N K13988
Torque lock nut
13 ± 1.3 N•m
[10 ± 1 lbf•ft]
57.15 [2.25]
Red
White
Black
Green
3520
1.52 [0.060] maximum
Air gap approximately
1/2 to 1 turns of thread
Orientation notch
22.9 [.90]
1.52 [0.060] maximum
Air gap approximately
2-3 turns of thread
Speed ring
9/16-18 UNF -2A THD
3521
45.5 [1.79]
02.7 [0.11]
8.99 [0.35]
1.52 [0.060] maximum
Speed ring
3522