Danfoss Link CC - Page 36

Installation Guide Danfoss Link™ CC
36
12/2014 VISGL90N Danfoss Heating Solutions
Danfoss Link™ PSU (In-Wall)
Operating voltage 100-250 V AC, 50/60 Hz
Recommended protection fuse Max. 16 A
Output voltage 15 V DC ±10%
Standby power consumption Max. 0.15 W
Max. load 10 W
Cable specications Recommended 1.5 mm
2
, max. 2 x 2.5 mm
2
Danfoss Link™ NSU (Net adapter)
Operating voltage 100-240 V AC, 50/60 Hz
Recommended protection fuse Max. 16 A
Output voltage 15 V DC ±10%
Standby power consumption Max. 0.3 W
Max. load 7 W
Cable length 2.5 m