Danfoss Link HP-kit User Manual

MAKING MODERN LIVING POSSIBLE
Danfoss Heat Pumps
Danfoss Link™ HP-kit
Installation instructions

Danfoss Link HP-kit Specifications

General

Brand	Danfoss
Model	Link HP-kit
Category	Conference System
Language	English

Summary

Introduction to Danfoss Link HP Kit

Quick Installation Guide for Danfoss Link HP Kit

Danfoss Link HP Kit Safety Precautions

Component Location for DHP-H/L/A Installation

Guidance on positioning components like the GateWay card and DCM03.

Fitting the GateWay Card

Step-by-step process for physically installing the GateWay card.

Installing HP Kit with DHP-H/L/A Heat Pumps

Connecting the GateWay Cable

Electrical Installation for Danfoss Link HP Kit

Fitting the DCM03 Unit (Internal)

Connecting the DCM03 cable to the GateWay and routing it internally.

System Start-up Procedures

Danfoss HP Kit Installation for DHP-AQ

DHP-AQ HP Kit Delivery Check

List of components included in the DHP-AQ HP kit for verification.

Checking Software Version for DHP-AQ

DCM03 Unit Wall Mounting Location

Installing the Power Supply Unit

Wiring the Danfoss Link HP Kit

Fitting the DCM03 Unit (Wall Mount)

Connecting to Danfoss Link CC

Connecting Other Units to Danfoss Link CC

Guidance on adding other wireless components to the Danfoss Link system.

Conducting a Network Test

Entering Basic Settings in Danfoss Link CC

Troubleshooting Danfoss Link HP Kit Issues

Using Danfoss Link CC with Online 2

Recycling Instructions for Danfoss Products