1.11 Resetting living eco® to default settings
1. 2.
Remove the battery cover and take out one
battery.
Press and hold for approx. 5 seconds, while
reinserting the battery.
1.12 Removing an adapter from living eco®
1. 2.
Remove the battery cover. Insert a small hex key or similar into the locking
hole to lock the adapter ring.
3. 4.
With the hex key locking the adapter ring,
turn the adapter in the shown direction.
Put back the battery cover.
Mount living eco® on another valve adapter
according to the instructions supplied with
the adapter.
Installation Guide living eco® Electronic Radiator Thermostat
To Next Page
Loading...
