4.5 Deleting a setback period
1. 2.
If the display is off, press , then press
again to open theprogramme menu.
Use to select the desired programme.
When the chosen programme is flashing,
press to conrm.
Use to select the desired day(s), press
to confirm the selection.
3. 4.
Start time for the setback period is flashing
slowly. Press , the start time ashes faster.
Use to set start time to half anhour
before stop time. Once you have changed the
start time, press .
now flashes. Press to confirm deletion of
the setback period.
User Guide living eco® Electronic Radiator Thermostat
To Next Page
Loading...
