Danfoss Living Eco - Overrule a Travel Programme (Early Return); Changing an Existing Travel Programme

21
Danfoss Heating Solutions VIIDB222 09/2013
4.7 Overrule a Travel programme (early return)
If returning earlier than expected you might wish to shift from the Travel programme to your
normal programme.
1. 2.
If the display is off, press . The display will
show: , set Travel period and the setback
temperature.
Press again to open theprogramme menu.
Use to select the usual programme P0, P1
or P2, press to conrm.
4.8 Changing an existing Travel programme
1. 2.
If the display is off, press , then press
again to open theprogramme menu.
Use to select , press to conrm.
Use to select , press to confirm.
3. 4.
The day of departure is flashing, change with
. Press to confirm your changes and
shift to the next value.
When the necessary changes are made, press
to confirm.
now flashes. Press to confirm your
changes of the Travel programme.
User Guide living eco® Electronic Radiator Thermostat