Danfoss MCX-RTU - Dehumidification Parameters

User Guide | MCX-RTU Rooftop
RS8KE102 | 21
© Danfoss | ADAP-KOOL® | 2018.11
HnS HT Night Set-
back
Aux Heat Mode Night Setback (0.0-30.0K) 0.0 K/F
Htd Gas Fan Delay
Off
Gas - Fan Delay Off (0-600) 60 s
HTs HT SupplyAir Aux Heat Mode Supply Air Target for VS
Fan (0.0-100.0°C)
30.6 °C/°F
Hm1 HT Min Fan
Speed
Aux Heat Mode Min Fan Speed (0.0-100.0) 50.0 %
Hm2 HT Max Fan
Speed
Aux Heat Mode Max Fan Speed (0.0-100.0) 75.0 %
HTi HT PI Integ Time
HTg Heat PI Gain
HUM Parameters >
Dehumd
Function Default Units
Dt1 DH1 Target Dehumidification 1 Target Temperature
(10.0-40.0°C)
100.0
Db1 DH1 PreDelay Dehumidification 1 Pre Delay (0-240) 240 m
Da1 DH1 PostDelay Dehumidification 1 Post Delay (0-240) 240 m
Dt2 DH2 Target Dehumidification 2 Target Temperature
(10.0-40.0°C)
100.0
HUM Parameters >
Dehumd
Function Default Units
Db2 DH2 PreDelay Dehumidification 2 Pre Delay (0-240) 240 m
Da2 DH2 PostDelay Dehumidification 2 Post Delay (0-240) 240 m
Dt3 DH3 Target Dehumidification 3 Target Temperature
(10.0-40.0°C)
100.0
Db3 DH3 PreDelay Dehumidification 3 Pre Delay (0-240) 240 m
Da3 DH3 PostDelay Dehumidification 3 Post Delay (0-240) 240 m
Dt4 DH4 Target Dehumidification 4 Target Temperature
(10.0-40.0°C)
100.0
Db4 DH4 PreDelay Dehumidification 4 Pre Delay (0-240) 240 m
Da4 DH4 PostDelay Dehumidification 4 Post Delay (0-240) 1000 m
DHr DH Range +/- Dehumidification Range +/- (0.0-10.0K) 10.0
DH1 DH Ambient
Lockout
Dehumidification Mode Ambient Lockout
(0.0-85.0°C)
100.0 °C/°F
DH2 DH Lockout
Range +/-
Dehumidification Mode Ambient Lockout
Range +/- (0-10.0K)
10.0 K/F
DnS DH Night Set-
back
Dehumidification Mode Night Setback
(0.0-30.0K)
30.0
DrT DH Reheat
Target
Dehumidification Reheat Target (0.0-
40.0°C)
40.0 °C/°F
DrR DH Reheat
Range +/-
Dehumidification Reheat Range +/- (0.0-
30.0K)
30.0 K/F
DH3 Max_Capacity
Period
Period for compressors at max capacity
before VS Fan will modulate. (0-60)
2 m
Dp1 Cp1 Press Target Dehumidification Compr 1 Pressure Target
(0.0-100.0)
8.2 bar/psi