Danfoss SonoMeter 30 Installation & User Guide

VUIGJ202 © Danfoss | Energy Meters | 2016.09 | 3
Installation & User Guide SonoMeter 30
1. Installation
1.1. Preparation
Only qualified personnel may install the equipment, following the requirements listed in this document.
More detailed instruction can be found on www.heating.danfoss.com.
Note! This product is approved for ambient temperature between 5-55° C, but to ensure optimal conditions for
battery it is recommended to install Calculator at max. 45° C. Avoid installation stress from pipes and fittings.
Flush the system.
1.2. Identification of installation: Return/Supply pipe installation and flow direction
Flow direction
Return pipe installation
Flow direction
Supply pipe installation

Danfoss SonoMeter 30 Specifications

General

Brand	Danfoss
Model	SonoMeter 30
Category	Measuring Instruments
Language	English