11
For Days 1-5 (weekdays)
a) Press PROG until 1st pre-set time and
temperature (Event 1, Days 1,2,3,4,5)
appears in display.
b) Use + or – buttons to adjust the TIME
(press and hold to change in 10 min
increments).
c) Use or buttons to adjust the
TEMPERATURE.
d) Press PROG to move to next preset time &
temperature (Event 2).
e) Repeat steps b, c & d for programming
Events 3, 4, 5 & 6.
For Days 6-7 (weekends)
Press PROG until 1st pre-set time and
temperature (Event 1 Days 6-7) appears
in display.
Repeat steps b, c and d above to
programme time and temperature
events for the weekend.
Changing the preset programmes
20
1
6 30
15
2
8 30
20
1
7 00
If you require just 2 Events per day (1 ON / 1 OFF)
Follow steps a, b & c above to programme
Event 1 (ON).
Press and hold and - buttons
together for 3 seconds to skip events
2,3,4 & 5.
Follow steps b & c to programme Event 6 (OFF).
To revert back to six events per day, reset the thermostat (see page 9).
User Instructions
GB
To Next Page
Loading...
