12
Running your programme
20
i2 24
Press PROG – the colon in the LCD display
will start to fl ash. The heating will now come
on and go off at the programmed times.
User Overrides
Press + and – together to change
between settings.
Press or until required temperature is
displayed.
This override will automatically cancel at beginning of
next programmed event)
Press and together once.
This override cancels at 2:00am.
Sometimes you may need to change the way you use your heating
temporarily, i.e.due to unusually cold weather. The TP5000 has several
user overrides, which can be selected without affecting the thermostat
programming.
Altering display to show either time or actual room
temperature
To temporarily use your weekend programme during
the week
(i.e. you have a days holiday or are off sick)
To temporarily alter the current programmed
temperature
User Instructions
GB
To Next Page
Loading...
