Danfoss TP7000 Series User Manual

TP7000 RANGE
10
F
D
ES
DK
NL
I
GR
PL
LT
CZ
HR
GB
2.0 Advanced
2.1 To convert to Thermostat mode
Press and hold  and  together until
display changes to colon blinking & default
temperature (8°C).
Press  or  to alter temperature as
required.
(If not already in Thermostat Mode, press
and hold  and  together until display
changes to colon blinking and 8°C).
Press DAY (display will show a suitcase and
:00).
Press + and - to enter number of days of
holiday (max. 99).
Use  and  buttons to alter the constant
temperature, if required.
When selected number of days have elapsed,
the unit will return to normal, controlling
according to your set programmes.
NOTE: Press  and  buttons together to
exit holiday mode if necessary.
2.2 To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can be converted to control at a constant user selected
temperature, instead of following the set programme.
NOTE: unit will remain in thermostat mode until the  and 
buttons are pressed together again.
The TP7000 can control at a constant low temperature while you are away
on holiday, returning to your programmed settings after a specifi ed number
of days (maximum 99 days).

Danfoss TP7000 Series Specifications

General

Brand	Danfoss
Model	TP7000 Series
Category	Thermostat
Language	English