Danfoss TP7000 Installation Instructions & User Guide

12
To convert to Thermostat mode
Press & hold  and  together until
display changes to colon blinking &
default temperature (8°C).
Press  or  to alter temperature as
required.
(If not already in Thermostat Mode, press
& hold  and  together until display
changes to colon blinking & 8°C).
Press DAY (display will show a suitcase
and :00).
Press + and - to enter number of days of
holiday (max.99).
Use  and  buttons to alter the constant
temperature, if required.
When selected number of days have elapsed,
the unit will return to normal, controlling
according to your set programmes.
NOTE: Press  and  buttons together
to exit holiday mode if necessary.
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can be converted to control at a constant user selected
temperature, instead of following the set programme.
!
NOTE: unit will remain in thermostat mode until the  and 
buttons are pressed together again.
The TP7000 can control at a constant low temperature while you are away on
holiday, returning to your programmed settings after a speci ed number of
days (maximum 99 days).
User Instructions
GB

Danfoss TP7000 Specifications

General

Type	Programmable Room Thermostat
Display	LCD
Frost Protection	Yes
Holiday Mode	Yes
Voltage	230V AC
Accuracy	±0.5°C
Programming	7-day programmable
Mounting	Wall-mounted
Contact Rating	3A (resistive)
Switching Current	3A (resistive)
Communication	Not applicable