21
Weekdays (Mon-Fri)
1. Press PROG until Event 1 appears
in the top left of the display and
MOTUWETHFR appears at the
bottom of the display.
2. Use the + and - buttons to set the
time you would like your heating to
fi rst come on in the morning (Event
1).
3. Use the and buttons to set the
temperature you want your heating
to reach at this time.
4. To move to the next setting, i.e. when
you would like your heating to go
off (Event 2) press the PROG button
again.
5. Continue programming the
central heating event times and
temperatures for weekday Events 3, 4,
5 & 6 as in Step 2-4.
Programming heating in 5/2 day mode
(one set of programmes for weekdays, another set for weekends)
User Instructions
GB
To Next Page
Loading...
