22
Weekends (Sat-Sun)
5. Press the PROG button again until
Event 1 appears in the top left of
the display and SASU appears at the
bottom of the display.
6. Use the + and - buttons to set the
time you would like your heating to
fi rst come on in the morning (Event
1).
7. Use the and buttons to set the
temperature you want your heating
to reach at this time.
8. To move to the next setting, i.e. when
you would like your heating to go
off (Event 2) press the PROG button
again.
9. Continue programming the
central heating event times and
temperatures for weekend Events 3,
4, 5 & 6 as in Step 6-8.
10. Press the PROG button to return the
unit to RUN mode
(time appears & colon in the display
begins to fl ash)
11. Proceed to page 23.
User Instructions
GB
To Next Page
Loading...
Need help?
General
