TP9000
4
GB
PL
GR
ES
GB
Please note: This product should only be installed by a
qualifi ed electrician or competent Heating installer, and should
be in accordance with the current edition of the IEEE wiring
regulations.
Specifi cation 230V model 24V model
Power supply 230 Vac, ±15%,
50/60 Hz
24 Vac, ±15%,
50/60 Hz
Switching action
2 x SPDT internally linked, Type 1BS
Unit switch rating 230 Vac, 3(1)A 24Vac, 3(1)A
Memory Backup Retained for life of product
Heat Temperature Range
Setting
5°C - 30°C
Factory Set Calendar
Clock
Automatic Summer/Winter time
change
Remote Sensor Inputs
(‘A’ models only)
Can be set by installer for remote sen-
sor, limited sensor, window contact,
tele-switch or outdoor sensor
Programme resolution ± 1 minute
Timing Accuracy ± 1 minute
Dimensions, mm (W, H, D) 135 x 88 x 32mm
Design standard EN 60730-2-7 +EN60730-2-9
Control Pollution Situ-
ation
Degree 2
Rated Impulse Voltage 2.5 kV
Ball Pressure Test 75°C
1.0 Product specifi cation
1.0 Basics
To Next Page
Loading...
Need help?
General
