1.6 Compliance and Certifications
The VLT® Safety Option MCB 152 is certified for use in safety applications up to and including:
• SIL 2 according to EN IEC 61508 and EN IEC 62061
• Performance Level PL d.
• Category 3 according to EN ISO 13849-1
Safety requirements are based on the standards valid at the time of certification. The VLT® Safety Option MCB 152 is approved for use
in safety-related applications where the de-energized state is considered to be the safe state. All examples related to I/O included in
this manual are based on achieving de-energization as the safe state.
Approvals
The MCB 152 is tested and certified by PNO.
1.7 Disposal
Do not dispose of equipment containing electrical components together with domestic waste.
Collect it separately in accordance with local and currently valid legislation.
Introduction
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578| 9
Danfoss A/S © 2020.02
To Next Page
Loading...
Need help?
General