Need help?Do you have a question about the Danfoss VLT AutomationDrive FC 361 N110 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Power | 110kW |
| Input Voltage | 380 - 480 VAC |
| Communication Protocols | Modbus RTU |
| Cooling Method | Air-cooled |
| Enclosure | Chassis |
Defines who is authorized to install and operate the equipment.
Highlights critical safety warnings for installation and maintenance.
Provides detailed electrical specifications for the drive.
Details specifications for the mains supply.
Lists motor output and data specifications.
Specifies control input/output and data.
Provides exterior and terminal dimensions for enclosures.
Details safe lifting procedures for the drive.
Covers derating for high temperatures and altitudes.
General safety instructions for electrical installation.
Provides a basic wiring schematic for the drive.
Details power and control cable connections.
Covers control wiring and terminal details.
Lists recommended fuses and circuit breakers.
Covers motor connection and protection.
Provides an overview of EMC principles.
Provides instructions for EMC-compliant installation.
Covers processes for controlling and regulating the motor.
Explains how to use the drive configurator.
To Next Page