Control card, USB serial communication
USB standard 1.1 (full speed)
USB plug USB type B device plug
NOTICE
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground. Use only isolated laptop/PC as connection to the USB
connector on the drive or an isolated USB cable/converter.
5.7 Enclosure Weights
Enclosure 380–480 V
J8 98 (216)
J9 164 (362)
Table 5.3 Enclosure J8–J9 Weights, kg (lb)
Specications VLT® AutomationDrive FC 361
22 Danfoss A/S © 03/2019 All rights reserved. MG06K102
55
To Next Page
Loading...
Need help?
General