Danfoss VLT HVAC Series

3.2.6 LCP Keypad, 0-4*
Enable, disable and password-protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Hand on] Key enabled
[2] Password Avoid unauthorized start in hand mode. If par.0-40
[Hand on] Key on LCP is included in the My
Personal Menu, then define the password in par.0-65
Personal Menu Password 0-65 Personal Menu
Password. Otherwise, define the password in par.0-60
Main Menu Password 0-60 Main Menu Pass-
word.
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Off] Key is enabled
[2] Password Avoid unauthorized stop. If par.0-41
[Off] Key on LCP 0-41 [Off] Key on LCP is included in the My
Personal Menu, then define the password in par.0-65
Personal Menu Password 0-65 Personal Menu
Password. Otherwise, define the password in par.0-60
Main Menu Password 0-60 Main Menu Pass-
word.
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Auto on] Key is enabled
[2] Password Avoid unauthorized start in auto mode. If par.0-42
[Auto on] Key on LCP is included in the My
Personal Menu, then define the password in par.0-65
Personal Menu Password . Otherwise, define
the password in par.0-60
Main Menu Password .
0-43 [Reset] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Reset] Key is enabled
[2] Password Avoid unauthorized resetting. If par.0-43
[Reset] Key on LCP is included in the par.0-25 My Personal
Menu
, then define the password in par.0-65 Personal Menu Password . Otherwise, define the pass-
word in par.0-60
Main Menu Password .
3 Parameter Description VLT
®
HVAC Drive Programming Guide
3-14 MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3