Danfysik SYSTEM 9100 - 7 Trouble Shooting

MAGNET POWER SUPPLY SYSTEM 9100
63
DANFYSIK A/S - DENMARK.
7 Trouble shooting
The syntax for trouble shooting hints:
WILL NOT GIVE MAIN POWER ON:
- Check for interlocks.
- Check connections to main contactor:
PHASE FAIL INTERLOCK:
- Check all phases.
- Check AC main power voltage.
MPS OVER TEMPERATURE INTERLOCK:
- Check ambient temperature:
> Temperature higher than 40 °C: Ambient temperature must come down.
MAGNET TEMPERATURE INTERLOCK:
- Check connections to magnet.
RACK FAN FAULT INTERLOCK:
- Check airflow switch in Rack:
> Failure in thermal breaker.