CHAPTER 1 GETTING STARTED
This chapter guides you to get the Rugged Tablet PC ready for operation.
1.1 Connecting the AC Power
Our tablet PC can operate either on the external AC power adapter or internal
battery power. It is suggested that you use AC power when you start up the
tablet PC first time.
**Caution
Use only the AC adapter included with your tablet PC. Using other AC adapters
may damage the tablet PC.
1. Plug the DC cord of the AC adapter to the power connector of the tablet PC.
2. Plug the female end of the AC power cord to the AC adapter and the male end to
the power electrical outlet.
3. When the AC adapter is connected, the Battery Pack also charges. You can check
the Battery Status LED indicator to see the current progress. The indicator turns
green when it is fully charged.
(For information on using battery power, see “Chapter 3, Power Management”)
**Caution
When you disconnect the AC adapter, disconnect from the electrical outlet first
and then from the tablet PC. A reverse procedure may damage the AC adapter
or the tablet PC.
When unplugging the connector, always hold the plug head. Never pull on the
cord.
To Next Page
Loading...