To Next PageTo Next Page
Need help?Do you have a question about the DAS DL-300E and is the answer not in the manual?
Lists standard components included with the DL-300E.
Lists optional accessories available for the DL-300E.
Explains usage of Smart Programmer, LCD, and LED code pads.
Wiring and settings for sirens, keypads, and diallers.
Programming master and user arm/disarm codes.
Assigning arm/disarm code authority per partition.
Programming primary phone number and communicator format.
Programming the account code for the primary phone line.
Programming secondary phone number and communicator format.
Determining the communicator's dialling sequence.
Assigning account codes for partitions three and four.
Setting dial attempts, entry/exit delays, and siren timeout.
Assigning characteristics to zones 1 through 16.
Setting special zone features like Isolate and Partial Mode.
Defining siren and sounder outputs for specific zones.
Enabling reporting for restore, isolate, trouble, and cancel events per zone.
Options for aborting reports, immediate restore, and auto isolate.
Configuring silent panic alarms and other code pad functions.
Zone sounder alerts, AC power alerts, siren test, partial mode, aux power, siren limit.
Ring back and multi-partition reporting features.
Limiting reports, swinger shutdown, phone line seizure delay.
Programming quick arm and partial mode entry delays.
Explains source, duration, category, and event for auxiliary outputs.
Demonstrates programming for a specific auxiliary output scenario.
Table mapping events to Data 3 (Category) and Data 4 (Event).
Illustrates selecting category and event for an auxiliary output.
Further mapping of events to category and event codes.
Example of configuring an output for the Ready LED status.
Configuring output polarity and changing duration units.
Settings for machine defeat, download calls, chime, and partial mode.
Programming the number of zones for partitions 1, 2, and 3.
Making Partition 1 a common area for others.
Settings for system power up state and input delays.
Configuring actions for detected phone line faults.
Setting the time for dynamic battery testing.
Setting the duration for the dynamic battery test.
Programming communicator codes for zones 1, 2, and 3.
Configuring communicator codes for zones 4, 5, 6, and 7.
Configuring communicator codes for zones 8, 9, 10, and 11.
Configuring communicator codes for zones 12, 13, and 14.
Configuring communicator codes for zones 15 and 16.
Codes for duress, auxiliary, panic, and tamper events.
Codes for automatic testing and event reporting.
Codes for closing, cancel, AC power loss, and low battery reports.
Codes for reporting zone restores, isolates, and troubles.
Codes for reporting troubles for zones 17 through 32.
Settings for expansion module communication and zone types.
Setting special features for zones 17-32.
Defining audible alerts for zones 17-32.
Enabling reporting for zones 17-32.
Configuring communicator codes for zones 17, 18, 19, 20, and 21.
Configuring communicator codes for zones 22, 23, 24, and 25.
Configuring communicator codes for zones 26, 27, 28, 29, and 30.
Configuring communicator codes for zones 31 and 32.
Programming user codes and their partition authority.
Codes for closing, opening, cancel, and weekend status.
Programming the system's opening and closing times.
Configuring autotest intervals and automatic download callback.
Setting current day, month, year, hour, and minute.
Programming the current day of the month, year, hour, and minute.
Access code, callback number, and optional callback features.
Disabling local programming and shutting down the panel.
Details for programming the master and user arm/disarm codes.
How to enable codes per partition for users 1-15.
General| Brand | DAS |
|---|---|
| Model | DL-300E |
| Category | Security System |
| Language | English |
