How to stop paper from slipping in my Dascom Printer?
To prevent paper from slipping off the forms tractors or tearing the perforated holes during printing with your Dascom Printer, make sure that the forms tractors are positioned correctly for the width of your paper and that the perforated holes of the paper fit directly over the tractor pins.
How to fix vertical misalignment on a Dascom Tally 1325 Printer?
To correct vertically misaligned (jagged) printing on your Dascom Printer, use the printer's vertical alignment function to check the vertical print alignment and adjust it as necessary.
Why is my Dascom Printer double spacing lines?
If lines are double spaced instead of single spaced on your Dascom Printer, change the Auto LF setting in the System Setup menu to No.
Why is my Dascom Tally 1325 overprinting on the same line?
If your Dascom Printer is overprinting on the same line, change the Auto CR setting in the System Setup menu to No.
Why does my Dascom Tally 1325 Printer not start at the left margin?
If the next print line starts where the previous line ended instead of at the left margin on your Dascom Printer, change the Auto CR setting in the System Setup menu to Yes.
What does paper select lever error mean on Dascom Tally 1325 Printer?
If you encounter a paper select lever error on your Dascom Printer, switch the paper select lever back to its correct position.
Instructions for placing the printer and handling packaging materials.
Identification of the main physical components of the printer.
Step-by-step guide for installing the ribbon cartridge into the printer.
Instructions for installing the paper loader and setting up paper feed.
Guide for connecting interface cables and the mains power supply.
Procedure for installing the printer driver on Windows systems.
Instructions on how to adjust the print gap lever for paper thickness.
Guide to using the printer's friction and tractor paper feed mechanisms.
Explanation of printer LEDs and the functions of control panel keys.
Description of the Online, Offline, and Power-On states of printer operation.
Configuration for system emulation, print settings, and page layout.
Settings for interfaces and advanced printer functionalities.
Procedures for vertical alignment, pin function, and physical margin adjustments.
Detailed instructions for cleaning the printer's housing, print head, and rollers.
Solutions for print quality, paper jams, and feeding problems.
Troubleshooting operating issues and understanding LED error indications.
Technical details on print system, speed, font matrix, print head, and paper feed.
List of code page commands and their corresponding tables.
Information on parallel interface connectivity and pin assignment.
Information on USB interface connectivity and specifications.
Details on standard and IBM character sets.
Information on international character sets and their commands.
List of code page commands and their ESC R parameters.
Visual representation of various code page character mappings.
List of command sequences for Epson emulation mode.
List of command sequences for IBM emulation mode.
General| Type | Dot Matrix Printer |
|---|---|
| Interface | Parallel, Serial, USB |
| Noise Level | 55 dBA |
| Number of Pins | 24 pins |
| Paper Handling | Single sheet, continuous paper |
To Next Page
