Data Aire DAP III - DAP III System Features; Standard & Operational Features

Object Identifier Type Description Units
1.3.6.1.4.1.22731.1.2.1.41.0 INTEGER
off(0)
on(non-zero)
Smoke detector: Unit shutdown
Optional alarm. An optional smoke detector
required
N/A
1.3.6.1.4.1.22731.1.2.1.42.0 INTEGER
off(0)
on(non-zero)
No water flow: Check pump
Optional alarm. An optional flow switch
required
N/A
1.3.6.1.4.1.22731.1.2.1.43.0 INTEGER
off(0)
on(non-zero)
Discharge temperature sensor problem
Optional alarm. An optional discharge air
temperature sensor required
N/A
1.3.6.1.4.1.22731.1.2.1.44.0 INTEGER
off(0)
on(non-zero)
High temperature warning
Standard alarm. The return air temperature rises
above the high temperature limits
N/A
1.3.6.1.4.1.22731.1.2.1.45.0 INTEGER
off(0)
on(non-zero)
Low temperature warning
Standard alarm. The return air temperature drops
below the low temperature limits
N/A
1.3.6.1.4.1.22731.1.2.1.46.0 INTEGER
off(0)
on(non-zero)
High humidity warning
Standard alarm. The relative humidity rises
above the high humidity limits
N/A
1.3.6.1.4.1.22731.1.2.1.47.0 INTEGER
off(0)
on(non-zero)
Low humidity warning
Standard alarm. The relative humidity drops
below the low humidity limits
N/A
1.3.6.1.4.1.22731.1.2.1.48.0 INTEGER
off(0)
on(non-zero)
Fan motor overload: Check motor amperage
Optional alarm. Optional fan motor overload
required.
N/A
1.3.6.1.4.1.22731.1.2.1.49.0 INTEGER
off(0)
on(non-zero)
Local alarm #1: See tag inside door
Optional alarm. External alarm input required
N/A
1.3.6.1.4.1.22731.1.2.1.50.0 INTEGER
off(0)
on(non-zero)
Local alarm #2: See tag inside door
Optional alarm. External alarm input required
N/A
1.3.6.1.4.1.22731.1.2.1.51.0 INTEGER
off(0)
on(non-zero)
Local alarm #3: See tag inside door
Optional alarm. External alarm input required
N/A
1.3.6.1.4.1.22731.1.2.1.52.0 INTEGER
off(0)
on(non-zero)
Local alarm #4: See tag inside door
Optional alarm. External alarm input required
N/A
1.3.6.1.4.1.22731.1.2.1.53.0 INTEGER
off(0)
on(non-zero)
Standby pump on: Check primary pump
Optional alarm. Pump failure input signal
required
N/A
1.3.6.1.4.1.22731.1.2.1.54.0 INTEGER
off(0)
on(non-zero)
Alarm: UPS power on: Check main power
Optional alarm. External alarm input required
N/A
1.3.6.1.4.1.22731.1.2.1.55.0 INTEGER
off(0)
on(non-zero)
Custom alarm #1
Optional alarm. External alarm input required.
Factory programmed custom message required
N/A
1.3.6.1.4.1.22731.1.2.1.56.0 INTEGER
off(0)
on(non-zero)
Custom alarm #2
Optional alarm. External alarm input required
Factory programmed custom message required
N/A
1.3.6.1.4.1.22731.1.2.1.57.0 INTEGER
off(0)
on(non-zero)
Custom alarm #3
Optional alarm. External alarm input required
Factory programmed custom message required
N/A
Document 600-000-615
8