Data Aire GUGU 070 - Page 89

10-2014 gForce User Manual ● 89
Press the ENTER key to move through the alarm/message inputs.
Press the UP or DOWN keys to change the alarm/message.
The following selections are available:
Audio Mode:
None (factory setting)
Full On
Long Beep
Short Beep
Pwr-Up:
Auto, No Alarm (factory
setting)
Auto, With Alarm
Man, Clr Alarm
Maint Due Msg:
None (factory setting)
1 – 1000 hours
Once the selections have been made, with the cursor on the title line, Press the DOWN
key to advance to the next screen.
The following screen will be displayed (values are for reference only):
Press the ENTER key to move through the alarm/message inputs.
Press the UP or DOWN keys to change the alarm/message.