DataCard CD820 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 57
Change settings as needed, and then click Set Current to apply changes.
 CardRegistration—Set the starting location of the printed area. The values are in mm
(1 mm = 0.0394 in). The setting specifies the distance to move the card before printing.
 Increase the value to move printing closer to the card’s leading edge.
 Decrease the value to move printing away from the card’s leading edge.
 ColorManagement—Specify whether to use color management in the printer.
 None disables color management in the printer and allows color management to be
handled by the application.
 sRGBColorSpace renders images to look similar to those displayed on PC monitors using
the standard Red, Green, and Blue color space.
 MatchSP results in printing that closely matches legacy card printers.
45) KWhiteShade 0 0 [-100 – 100]
46) LeadTrim 0.254 0.254 [0 – 5.08]
47) SettingsGroupPurpose Print Print
48) TPower 0 0 [-100 – 100]
49) TPowerDuplex 0 0 [-100 – 100]
50) TrailTrim 1.47 1.47 [0 – 5.08]
51) TWhiteShade 0 0 [-100 – 100]
52) VerticalOffset 17 14 [-100 – 100]
53) YMCPower 0 0 [-100 – 100]
54) YMCPower600 0 0 [-100 – 100]
55) YMCPowerDuplex 0 0 [-100 – 100]
56) YMCPowerNosRGB -48 -48 [-100 – 100]
57) YMCWhiteShade 0 0 [-100 – 100]
Description Default Value
Current Value
(unit) Allowed Range

DataCard CD820 Specifications

General

Brand	DataCard
Model	CD820
Category	Printer
Language	English