DataCard CE840 - Select a Location for the Printer

2 CE840 Instant Issuance System
CE840 Instant Issuance System Quick Install Guide
1. Select a Location for the Printer
• Install the printer in a location that is clean and well
ventilated, free of vibration or shock.
• For venting and clearance, choose an area that is
approximately 27 inches (686 mm) wide, 31 inches
(788 mm) deep, and at least 27.4 inches (696 mm) high.
Refer to the printer’s Installation and Administrator’s
Guide for complete site requirements.
• Do not install the printer in direct sunlight.
• Install the system in a secure location.
• Install the system in a location that has access to two
AC outlets and a network port.
Refer to the printer’s Installation and Administrator’s Guide
found on the Owner’s Library CD for detailed installation
instructions.