DataCard CE840 Quick Install Guide

7 CE840 Instant Issuance System
CE840 Instant Issuance System Quick Install Guide
3. Assemble the Printer and Embosser
a. Locate the interconnect cable in the cable routing
area of the embosser, and make sure that it remains
accessible.
b. Slide the printer locking lever inside the embosser to the
left to move the mounting lock to the unlocked position.
c. Lift the printer over the embosser and align the pins on
the embosser with the holes on the underside of the
printer.
d. Press down carefully, but rmly, on the printer to
position it.
e. Push the printer locking lever to the right to lock the
printer to the embosser. Make sure that the printer is
locked securely to the embosser.
Interconnect
Cable
Printer Locking
Lever

DataCard CE840 Specifications

General

Brand	DataCard
Model	CE840
Category	Printer
Language	English