7 CE870 Instant Issuance System
CE870 Instant Issuance System Quick Install Guide
Interconnect
Cable
5. Assemble the Printer and Embosser
a. Locate the interconnect cable in the cable routing
area of the embosser, and make sure that it remains
accessible.
b. Slide the printer locking lever inside the embosser to the
left to move the mounting lock to the unlocked position.
c. Lift the printer over the embosser and align the pins on
the embosser with the holes on the underside of the
printer.
To Next Page
Loading...
Need help?
General
