DataCard SD260LTM Installation And Administration Guide

SD Series Installation and Administrator’s Guide 39
MagStripeGeneral Set magnetic stripe
options including
coercivity, custom
magnetic stripe formats,
and data formats.
No Change
coercivity,
custom formats,
and data
formats
MagStripeCustomTrack1 Set customized magnetic
stripe values for track 1.
No Change all
Current Values
MagStripeCustomTrack2 Set customized magnetic
stripe values for track 2.
No Change all
Current Values
MagStripeCustomTrack3 Set customized magnetic
stripe values for track 3.
No Change all
Current Values
Laminator Specify laminator settings Change all
Current Values
Change all
Current Values
LaminateType Specify overlay settings Change all
Current Values
Change all
Current Values
Update Password Set or update passwords
for the WebUser and
WebAdmin access levels.
No Change
WebUser and
WebAdmin,
SNMP read, and
SNMP write
passwords
Set Job Queue State Enter values for shipping
the printer to a repair
facility, or when securing
the printer to perform
troubleshooting,
maintenance, or other
procedures. This setting is
used primarily by financial
printers. Contact your
service provider for more
information.
Requires a
password
Requires a
password
Printer Setting Menu
Option Function WebUser WebAdmin

DataCard SD260LTM Specifications

General

Brand	DataCard
Model	SD260LTM
Category	Printer
Language	English