To Next Page

To Previous Page

50 Printer Manager

• TPowerDuplex—Modifytheintensityoftheback‐sideT(topcoat)ribbon

panel.

• Increasethevaluetomakeprintedtopcoatthickerormoreuniform.

• Decreasethevaluetopreventribbonbreakswhileprintingthetopcoat.

• TrailTrim—Modifythenumberofmillimeterstoremovefromthetrailing

edgeofafull‐sizeimagetokeepitwithintheprintarea(1mm=0.0394in.or

about11.8dotrows).

• Increasethevaluetolengthentheprintedarea.

• Decreasethevaluetoshortentheprintedarea.

• TWhiteShade—Modifytheamountofpowerappliedtotheprintheadto

reduceribbonfrictionwithouttransferringmaterial.Decreasethevalueif

materialtransfers tothecardwhenitshouldnot.

• YMCPower—Modifytheinte nsityoftheYMC(color)ribbonpanels.

• Increasethevaluetomakethecolorprintingmoreintense.

• Decreasethevaluetoreducethecolorintensityortopreventfrequent

ribbonbreakswhenprintingcolors.

• YMCPower600—Modifytheprintintensityat600dpifortheYMC(color)

ribbonpanels.

• Increasethevaluetomakethecolorprintingmoreintense.

• Decreasethevaluetoreducethecolorintensityortopreventfrequent

ribbonbreakswhenprintingcolors.

• YMCPowerDuplex—Modifytheintensityoftheback‐sideYMC(color)ribbon

panels.

• Increasethevaluetomakethecolorprintingmoreintense.

• Decreasethevaluetoreducethecolorintensityortopreventfrequent

ribbonbreakswhenprintingcolors.

• YMCPowerNosRGB—Modifytheintensitywhenyouareprintingwithoutthe

sRGBcolormode.

• Increasethevaluetomakethenon‐sRGBcolordarker

• Decreasethevalueifusingnon‐sRGBcolormodetopreventoverlydark

printingorribbonwrinklesortears.

DataCard SD260LTM Installation And Administration Guide

Other manuals for DataCard SD260LTM