To Next Page

To Previous Page

SD Series Installation and Administrator’s Guide 65

•

OverlayLoadedInL2Name—ThenameoftheoverlaytypeloadedintheL2

laminatorcartridge.Thisinformationisobtainedfromthesupplyrolland

cannotbechanged.Iftheoverlaynameisthesameastheoverlaytype

selectedinOverlayDisplayedName,thevaluesyouspecifytothesettingson

thispageapplytotheoverlay.Iftheoverlaynameisnotthesame,nochanges

areapplied.

• OverlayPartNumber—Thepartnumberoftheoverlaynamedin

OverlayDisplayedName.Thisfieldisobtainedfromthesupplyrolland

cannotbechanged.

• OverlaySpeed—Thedefaultspeed,instepspersecond,atwhichtoapplythe

overlaytypenamedinOverlayDisplayedName.Thisvalueisobtainedfrom

thesupplyrollandcannotbechanged.Makeadjustmentstothespeedusing

theOverlaySpeedAdjustmentsettings.

• OverlaySpeedAdjustmentL1,OverlaySpeedAdjustmentL2—Adjustthespeed

atwhichtoapplytheoverlaytypenamedinOverlayDisplayedNamewhenit

isloadedinthespecifiedcartridge.Thespeedadjustmentismeasuredin

stepspersecondofthemotorthatmovesthecard.Setthespeedasthe

differencebetweenthedefaultspeedvalue(showninOverlaySpeed)and

speedyouwanttouse.Decreasethespeedtoimprovehowtheoverlay

adherestothecard.Forexample,ifthedefaultis160,andyouwanttosetthe

speedto150,enter‐10.

• OverlayTemp—Thetemperatureatwhichtoapplytheoverlaytypenamedin

OverlayDisplayedName.ThisCurrentValueisobtainedfromthesupplyroll

andcannotbechanged.Makeadjustmentstothetemperatureusingthe

OverlayTempAdjustmentsettings.

• OverlayTempAdjustmentL1,OverlayTempAdjustmentL2—Adjustthe

temperatureatwhichtoapplytheoverlaytypenamedin

OverlayDisplayedNamewhenitisloadedinthespecifiedcartridge.Enterthe

temperatureadjustmentasthedifferencebetweentheDefaultValueandthe

recommendedtemperatureobtainedfromthesupplyroll,bothshownin

OverlayTemp,toapplytheselected

overlaytype.

• Increasethetemperaturetoimprovehowwelltheoverlayadherestothe

card.

• Decreasethetemperaturetopreventwrinklingoftheoverlay.

DataCard SD260LTM Installation And Administration Guide

Other manuals for DataCard SD260LTM