DataCard SD260LTM Installation And Administration Guide

SD Series Installation and Administrator’s Guide 71
•
LaminationOptions—Usethistesttodeterminewhetheralaminatorsystem
isapplyingoverlaymaterialproperly.Youcanselectfromthefollowing
laminationoptions:
• L1Front—AppliesoverlayfromtheL1laminatortothefrontofthecard.
• L1Back—AppliesoverlayfromtheL1laminatortothebackofthecard.
• L1FrontL1Back—Appliesoverlayfr omtheL1laminatortothefrontand
backofthecard.
• L2Front—AppliesoverlayfromtheL2laminatortothefrontofthecard.
• L2Back—AppliesoverlayfromtheL2laminatortothebackofthecard.
• L2FrontL2Back—Appliesoverlayfr omtheL2laminatortothefrontand
backofthecard.
• L2BackL1Front—AppliesoverlayfromtheL2laminatortothebackof
thecard,andoverlayfromtheL1laminatortothefrontofthecar d.
• L2FrontL1Back—Appliesoverlayfr omtheL2laminatortothefrontof
thecard,andoverlayfromtheL1laminatortothebackofthecard.
• Debow—Selectthisoptiontoapplythedebowactionwhenanoverlayis
appliedtothecard.
• Impress—Selectthisoptiontoimpressacard,ifanimpresserisinstalled.
• Copies—Enterthenumberoftestcardstoprintforeachtest,from1to10.
• ParkSmartCard—Selectthisoptiontoparkthetestcardinthesmartcardbay.
Thetestdoesnottransmitanydata,butisusedtotestthemovementofthe
cardinto,andoutof,thebay.
• SmartCardParkTime—Entertheamountoftimetoholdthetestcardinthe
smartcardbay,from0to300seconds.
• Donotejectcard—Selectthisoptiontopreventthetestcardfrombeing
ejectedfromtheprinter.

DataCard SD260LTM Specifications

General

Brand	DataCard
Model	SD260LTM
Category	Printer
Language	English