Datacolor 200 User's Guide 15
Maintenance
The sections that follow provide detailed instructions for maintaining Datacolor® 200 and calibration
tiles.
These instructions and tips will help to insure that the instrument continues to perform properly
over its life.
CAUTION
There are no user-serviceable parts for this equipment.
Sphere Cleaning
The sphere should be examined visually for the presence of dust, sample particles, fibers, and
excessive yellowing due to environmental influences. This inspection should be performed frequently,
especially if you measure loose materials.
NOTE
If you discover loose materials in the sphere, contact Datacolor Service for instructions to remove the
loose material.
Tile Handling and Cleaning
Handling Tiles
Handle calibration tiles with extreme care. Do not drop them, or scratch the glazed surface.
Always grasp the tile using its edges.
Cleaning Tiles
The calibration tiles should be cleaned before each use. Wipe each tile clean with a soft,
lint-free cloth.
To Next Page
Loading...
