Datacolor 200 User Guide 1
Datacolor® 200
About Datacolor 200
Datacolor 200 is a member of the newest generation of Datacolor bench top color measuring
instruments. Incorporating state-of-the-art CMOS integrated circuit technology in the instrument
design, it is intended for use as a device for measuring, specifying and evaluating color in both
laboratory and retail settings.
Electrical/Environmental Requirements
100 – 240 VAC
50 to 60 Hz
1 A
Absolute Operating
Environment
5º to 40º C
20-85% RH, non-condensing
Altitude up to 2,000 meters
Safety Warnings
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
CAUTION
There are no user-serviceable parts for this equipment
Light Source
Do not stare directly into the open port located in the front door panel when the measurement is in
progress. Staring directly into the light source can result in eye discomfort similar to that caused by
staring at a camera flash.
Power
CAUTION
Disconnect power before servicing.
The power cord supplied with the unit must be used.
To Next Page
Loading...
